Electro-Static Discharge Work Surface

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Requirement: Make sure nothing, especially metal or other lightweight particles, can get into the headlamp housing.
Make sure also when handling an open headlamp that no oil, grease, silicone or other such materials can contact the headlamp components, otherwise they can turn into steam and fog up the headlamp.
Touching electronic circuits with bare hands can lead to migration.
ESD (electro static discharge) protection: Always follow the German Industry Standardization EN 613-40-5-1 when handling.
Components, assemblies or electronics that have fallen down cannot be used again.
:VAS6613 . Refer to ESD WORK SURFACE :VAS6613, USING .