LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1003 (Engine System (Precautions & General Information - CREC, Cred, CREH)) >> 00 General, Technical Data >> Safety Precautions >> Safety Precautions When Working On SUBFRAME

Safety Precautions When Working On SUBFRAME

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Note the following When Working on the Subframe:

CAUTION:

There is a risk of damaging the suspension components.

  • If the subframe mount, steering gear or subframe crossbrace are not installed correctly, do not rest the vehicle on its wheels.
  • Supporting the vehicle at the subframe or the subframe crossbrace (for example, using a floor jack or similar device) is not permitted.
scientia non olet · About LEMON Manuals