Fuel Level Sensor 2 -G169-, REMOVING AND INSTALLING: Notes

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts

Seal - Locking flange

Special tools and workshop equipment required

Trim Removal Wedge :3409
Window Cutter :VAG1561A
Window Cutter - L Blade (2 pc.) :VAG1561/22
Wrench - Fuel Sending Unit :T10202
For the correct sealant. Refer to the Parts information.