Fuel Level Sensor -G-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to CLEAN WORKING CONDITIONS .
-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Pull the Fuel Level Sensor -G- first slightly toward the inside and then upward and remove it in the direction of -arrows-.
-- Release the retaining tabs -arrows- with a screwdriver, if necessary.
-- Disconnect the connector from the locking flange.