Overview - Vacuum Pump

NOTE:

Only The Vacuum Pump Is Shown In The Illustration And Not The Installation Location

Fig 1: Identifying Vacuum Pump Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 9 Nm
- Remove to remove the pump.
  NOTE:
  The pump is not designed to be disassembled.
Vacuum Pump
Vacuum Hose
- Secure with hose clamps that match those used in production service information.
Bolt
- 5 Nm
  NOTE:
  Installing the bolt depends on the model.
  
  Alternatively, secure the vacuum hose with the hose clamp for the vehicle version service information.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.