Brake Rotor, Removing And Installing, 1LA, 1LB, 1LJ And 1LD 1ZT + S4 /S5: Installing

Clean the brake rotor, wheel hub and contact surfaces before installing.

-- Place the brake rotor on the wheel hub.

NOTE:

When positioning the brake rotor, do not tilt it on the wheel hub.

-- Install the securing bolt -arrow- and tighten.

Fig 1: Identifying Brake Disc Secure Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Install the brake caliper with the brake pads and front brake carrier. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, 1LA, 1LB, 1LJ AND 1LD 1ZT + S4 /S5 .

-- Install The Wheels.

Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .