LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Equipment (Cabriolet) >> 66 Exterior Equipment >> Name Badges And Emblems >> Name Badge, Replacing

Name Badge, Replacing

Special tools and workshop equipment required 

CAUTION:
  • Badges and emblems that are remove must be replaced.
  • The vehicle must reach room temperature before installing the name badge and emblems.
  • The adhesive surface on the body must be free of dirt and grease, as well as free of adhesive residue.
  • Clean the adhesive surfaces using Cleaning Solution:D 009 401 04  .
  • Warm the adhesive surfaces to approximately 40 °C (104 °F) using a hot air blower.
  • After installing, take the roller and press the brand emblems one more time.
scientia non olet · About LEMON Manuals