LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front (Cabriolet) >> 50 Body Front >> Lock Carrier >> Overview - Lock Carrier

Overview - Lock Carrier

Fig 1: Identifying Lock Carrier With Attachments Overview
GWWA50-10230Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Bolt
    • 30 Nm
    • 3 pieces per side.
  2. Impact Member
    • Secured to the lock carried with the bolt -3-.
    • Do not remove with the bracket when removing the lock carrier.
  3. Bolt
    • 4 Nm
    • Secures the impact bar to the lock carrier.
  4. Lock Carrier
    NOTE:

    The Radiator Coolant Must Be Drained Before Removal. Refer to COOLANT, DRAINING AND FILLING [CAED, CAEB, CPMB, CPMA] .

    • Removing:
    • Remove the lock carrier cover.

      -- Remove front bumper. Refer to BUMPER COVER, REMOVING AND INSTALLING .

      -- Disconnect all electrical wires and hoses to the lock carrier at the connection points.

      -- Disconnect the hood lock cable at the coupling. Refer to OVERVIEW - RELEASE CABLE .

      -- Remove bolts -5-.

      -- Remove the bolts -1- on the longitudinal member (quantity: 3 per side).

      NOTE:

      The impact absorbers with the brackets are secured to the lock carrier with one bolt each -1- and must not be removed.

      -- Remove the bolts -6- on the lower lock carrier.

      -- Remove the lock carrier with the headlamps forward.

    • Install in reverse order of removal.
    • Adjust the headlamps after installing.
  5. Bolt
    • 10 Nm
  6. Bolt
    • 1.5 Nm
  7. Fender
scientia non olet · About LEMON Manuals