Right Seal, Replacing

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Procedure

Fig 1: Pry Out Flange Shaft Sealing Ring

Courtesy of AUDI OF AMERICA, LLC

-- Remove the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .

-- Pry out the flange shaft sealing ring -arrow-.

-- Lightly coat the outer circumference of the new shaft seal with oil.

-- Drive in the right flange shaft seal using the Seal Installer - Flange Shaft T40163 until stop without tilting.

Fig 2: Identifying Shaft Seal

Courtesy of AUDI OF AMERICA, LLC

-- Fill the space between the sealing- and dust lip half way with sealing grease.

-- Install the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .