Removing The Roller Bearing From The Output Shaft
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
A - Separating device 22 to 115 mm, for example Kukko 17/2
NOTE:
The roller bearing will get damaged when it is being removed, therefore always replace it.
The roller bearing cage can also get damaged when removing using a screwdriver. Then mount the separating tool on the inner race.
Install the 3rd and 4th gear wheels and the roller bearings on the output shaft.