Flange Shaft Mounting Needle Bearing, Driving In Flush In The Output Shaft

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driving In Flange Shaft/Pinion Needle Bearing Flush

Courtesy of AUDI OF AMERICA, LLC

Install needle bearings with the lettering on the bearing (the side with thicker metal) facing towards 3013.