Removing The Shaft Seal From The Dual Mass Flywheel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Tension the internal puller -A- behind the sealing lip on the shaft seal -B- and pry out the seal.

Fig 1: Identifying Shaft Seal from the Dual Mass Flywheel, Removal

Courtesy of AUDI OF AMERICA, LLC

A - Internal puller 30 to 37 mm, for example Kukko 21/5