Installing The Shaft Seal Into The Dual Mass Flywheel
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- The needle bearing is installed inside the dual mass flywheel.
- The open side of the shaft seal faces the transmission.
- Attach the clutch pressure plate with the clutch plate to the dual mass flywheel. Refer to CLUTCH PRESSURE PLATE AND CLUTCH PLATE, SACHS or CLUTCH PRESSURE PLATE AND CLUTCH PLATE, LUK .