LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Clutch - Manual Transmission 0B2 AWD (Coupe) (As Of 09.2009)) >> Clutch >> Description And Operation >> Clutch, SACHS Assembly Overview >> Checking The Needle Bearing Inside The Dual Mass Flywheel On A 4-Cylinder TDI Vehicle: Vehicle (Except On The 125 Kw TDI)

Checking The Needle Bearing Inside The Dual Mass Flywheel On A 4-Cylinder TDI Vehicle: Vehicle (Except On The 125 Kw TDI)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Needle Bearing Inside Dual Mass Flywheel
GWWA30-10222Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Check which version of the needle bearing is inside the dual mass flywheel.

  • Depending on the version of the needle bearing installed that have rollers or needle bearings missing every 4th roller. This does not mean that the needle bearing is faulty.
  • Needle bearings is missing the 4th roller -arrows- must be replaced on 4-cylinder TDI vehicles (except 125 kW TDI). Refer to DUAL MASS FLYWHEEL NEEDLE BEARING, SACHS AND LUK .
  • New needle bearings are equipped with rollers.
  • On all other vehicles, the missing 4th roller is not a defect in the needle bearing. Do not replace the needle bearing!