Clutch Pedal: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the mounting bracket. Refer to MOUNTING BRACKET, MANUAL TRANSMISSION .

-- Remove the over-center spring -2 -. Refer to OVER-CENTER SPRING .

Fig 1: Actuating Clutch Pedal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the mounting pin -1-.

Fig 2: Removing Mounting Pins

Courtesy of AUDI OF AMERICA, LLC

-- Lift the securing tab -arrow A-, turn the axle in direction of -arrow B- and remove the axle -2-.

-- Remove the bearing axle -2- and the clutch pedal -3-.