LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Controls, Housing - Manual Transmission Internal Components 0B4 AWD (Coupe)) >> 34 Controls, Housing >> Disassembly And Assembly >> Transmission >> Assembling >> For The Transmission: AUDI A5 Coupe 2008 → Through Transmission Series Number 000760

For The Transmission: AUDI A5 Coupe 2008 → Through Transmission Series Number 000760

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Transmission with these transmissions series numbers were installed only in the Audi A5 Coupe from MY 2008.

-- Lightly oil outer circumference of new shaft seal for the input shaft.

-- Fill the space between the sealing- and dust lip half way with sealing grease G 052 128 A1.

-- Drive the new seal in until it is flush without tilting it.

Fig 1: Installing Input Shaft Seal
GWWA39-10266Courtesy of AUDI OF AMERICA, LLC