LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Final Drive, Differential - Manual Transmission 0B2 (Coupe)) >> 39 Final Drive, Differential >> Removal And Installation >> Rear Flange Shaft Seal, Replacing >> Removing

Rear Flange Shaft Seal, Replacing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Remove the center differential housing -B-. Refer to CENTER DIFFERENTIAL, TRANSMISSION INSTALLED 

Fig 1: Locating Center Differential Housing Bolts
GWWA34-10452Courtesy of AUDI OF AMERICA, LLC

Remove the circlip -arrow-.

Fig 2: Identifying Circlip -Arrow-
GWWA34-10450Courtesy of AUDI OF AMERICA, LLC

Removing the flange shaft.

Fig 3: Pressing Out Flange Shaft
GWWA34-0709Courtesy of AUDI OF AMERICA, LLC

-- Position the center differential housing so the flange shaft does not come into contact with the VW 401 and VW 402 when pressing it off.

Pry out the shaft seal -1-.

Fig 4: Prying Out Shaft Seal -1-
GWWA34-10454Courtesy of AUDI OF AMERICA, LLC
NOTE:

Disregard -2-.