Rear Final Drive 0BF And 0BE

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Code letters, transmission allocations, ratio and capacities, refer to the appropriate service information .

When repairing the driveshaft or the rear final drive, refer to the Removal and Installation

Location on Rear Final Drive

Clutch classification -arrow 1-

Fig 1: Identifying Location On Rear Final Drive

Courtesy of AUDI OF AMERICA, LLC

Engine code and build date -arrow 2-

NOTE:

The hydraulic control unit with the side chambers is the way to recognize the rear "0BE" and "0BF" final drive.

Code LFW -arrow 1-

Fig 2: Last Six Characters Of Serial Number (2) Is The Build Date In The Format Year-Month-Day; In This Case, Build Date Is December 9, 2008
Courtesy of AUDI OF AMERICA, LLC
Rear final drive build dates -arrow 2-

Example:	08	12	09
	I	I	I
	Year -2008- of manufacture	Month	Day

-Arrow 3- Classification (classification of the clutch wear values) for the right clutch. Example: -272D-
-Arrow 4- Classification (classification of the clutch wear values) for the left clutch. Example: -4A10-

Additional data can be ignored.

NOTE:

When installing a new rear final drive unit, the final drive code, the PR number and the vehicle engine code must be verified in the electronic parts information. This is the only to assure the correct allocation.