Headrest Cover And Cushion, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the cushion -1- into the cover -2-.
-- Insert headrest mount in upholstery with cover.
-- Close the main zipper by moving the upper cover flat channel -1- over the cover -2-.
-- Slide the edge of the fabric edge with the flat channel into the U-channel -5-.
-- Closing the side locks is similar to the closing the main lock.
-- After closing the main zipper and the side zippers with a needle or other pointed object, line up the cover and the profiles.
-- Ensure the cover sits on the upholstery -3- without any wrinkles and without seam markings.
Install in reverse order of removal.