HYDRAULIC PULSE MEMORY WITH Accumulator Solenoid -N485-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission installed
CAUTION:
Danger of causing damage to the transmission.
- Do not start the engine if there is no ATF in the transmission and if the Mechatronic is removed.
-- Transmission in "P".
-- Turn off the ignition and remove the key.
-- Remove the ATF oil pan, refer to OIL PAN, REMOVING AND INSTALLING .
-- Remove the ATF filter, refer to ATF FILTER, REMOVING AND INSTALLING .
CAUTION:
There is a risk of destroying the Transmission Control Module (TCM) (Mechatronic) with electrostatic discharge.
- The person handling the electronic connectors must always "discharge static electricity" before working with them. Do this by quickly touching a grounded object with the hand, for example a heating device or hoist
- Do not touch contacts in transmission connector with hands.
-- Disconnect the connector -B- for the hydraulic pulse memory -A- carefully.
-- Remove the bolts in the sequence -3 to 1-.
-- Remove the hydraulic pulse memory -A-.