Overview - Gas-Filled Strut
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Gas-Filled Strut
- To remove securing spring -arrow-, raise slightly and remove gas-filled strut from ball stud.NOTE:
Ensure position is correct when installing: gas-filled strut tube must be engaged on hood side.
- To remove securing spring -arrow-, raise slightly and remove gas-filled strut from ball stud.
- Hood
- Ball Pin
- On the hood side 21 Nm