Hood Release Lever, Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Release Cable
- Clip the cable bracket into the mounting bracket as shown in the magnified section of the illustration.
- Hood Release Lever Bracket
- The hood release lever cover is removed.
- The trim for the >>lower A-pillar is removed<<.
- Remove the screws -3- and disengage the cable -1-.
- Bolts
- 2 Nm
- Clip
- A-Pillar