LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 645 (Exterior Body Panels (Hood, Lids)) >> 55 Hood, Lids >> Fuel Filler Door Unit >> Removing And Installing Fuel Filler Door

Removing And Installing Fuel Filler Door

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel filler door insert.

-- Release the tank flap insert at the markings -arrows-.

Fig 1: Locating Markings -Arrows-
GWWA55-10495Courtesy of AUDI OF AMERICA, LLC

-- To do this, insert a small screwdriver diagonally from underneath through the marking in the tank flap insert over the latches.

Fig 2: Locating Latches -Arrows-
GWWA55-10496Courtesy of AUDI OF AMERICA, LLC

-- Gently lift the screwdriver and release the latches.

-- Pull the tank flap insert in steps out of its cut-out.