LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (2.0L - Turbocharger & Supercharger - Engine Code(S): CAEB, CHJA, CPMA & CPMB) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING >> Removing

Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -1- on the Charge Air Pressure Sensor -G31-.

Fig 1: Identifying Charge Air Pressure Sensor Components
GWWA21-10313Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the Charge Air Pressure Sensor -G31- from the air duct pipe.

scientia non olet · About LEMON Manuals