Sliding Bar Ball, Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Camshaft Spacer T40191
Installing
WARNING:
Risk of eye injury from balls popping out.
- Wear protective eyewear.
-- Insert the spring -1- in the camshaft.
-- Place the ball -2- on the spring in the camshaft.
-- Push the ball and spring downward in direction of -arrow A- using the Camshaft Spacer T40191/1 and hold.
-- Push the sliding bar -3- in the direction of -arrow B-.