LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (2.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CAEB, CHJA, CPMA & CPMB) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Balance Shaft Drive Chain, Removing And Installing >> Removing

Balance Shaft Drive Chain, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper timing chain cover, refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the lower timing chain cover, refer to LOWER TIMING CHAIN COVER, REPLACING .

-- Remove the camshaft timing chain, refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the guide rail for the camshaft timing chain -1-.

Fig 1: Identifying Camshaft Timing Chain Components
GWWA15-10460Courtesy of AUDI OF AMERICA, LLC

-- Remove the camshaft timing chain tensioner -3-.

-- Remove the chain tensioner for the balance shaft drive chain -1-.

Fig 2: Balance Shaft Timing Chain, Tensioning Rail And Guide Rails
GWWA15-10462Courtesy of AUDI OF AMERICA, LLC

-- Remove the tensioning rail -2-.

-- Remove the guide rail -3-.

-- Remove the guide rail -4-.

-- Remove the timing chain.