Charge Air Pressure Sensor - G31 - / - G447 -, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Version 2 Cylinder Bank 1 (Right):

Fig 1: Identifying Version 2 Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and move the bracket and fuel hose -1- to the side.

Cylinder Bank 2 (Left):

-- Free up the vacuum hose -1-.

-- Remove the screws -arrows- and remove the cover -2-.

Fig 2: Identifying Vacuum Hose -1-, Bolts -Arrows- And Cover -2-

Courtesy of AUDI OF AMERICA, LLC

Continued for Both Sides:

-- Disconnect the connector -1-.

-- Remove the bolts -arrows- and remove the charge air pressure sensor.

Fig 3: Installation Location Charge Air Pressure Sensor -G31- /Intake Manifold Temperature Sensor -G72-

Courtesy of AUDI OF AMERICA, LLC