Overview - Oil Pump And High Pressure Pump Drive Chain
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Oil Pump Drive Chain and High Pressure Pump
- Removing and installing, refer to OIL PUMP AND HIGH PRESSURE PUMP DRIVE CHAIN, REMOVING AND INSTALLING .
- Bolt
- 30 Nm + an additional 45° turn
- Replace
- Drive Chain Sprocket
- For the oil pump
- Installed position: the side with lettering on it faces the engine
- Pressure Spring
- Crankshaft
- With toothed gear for the oil pump drive chain and the high pressure pump
- Drive Chain Sprocket
- For high pressure pump
- Installation position: labeled side is legible from behind
- Guide Rail
- Guide Pins
- 5 Nm + an additional 90° turn
- For guide rail
- Replace
- Chain Tensioner
- With glide track
- Bolt
- 5 Nm + an additional 90° turn
- Replace