Flange/Driveshaft Seal

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2015 Audi S5, 2015 Audi RS 5, and 2014 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Thrust Plate VW 402
Punch VW 407
Thrust Disc VW 412
Sleeve 40 - 20
-3- Separating Device 22 to 75 mm, for example Kukko 17/1

Fig 1: Pressing Dust Cap Off Of Driveshaft Flange

Courtesy of AUDI OF AMERICA, LLC

A - Separating tool 22 to 115 mm, for example Kukko 17/2

Fig 2: Pressing Dust Cap Onto Driveshaft Flange

Courtesy of AUDI OF AMERICA, LLC

Installed position of the ring -A- : the indentation in the ring faces the 40 - 20.