Engine (vehicles with manual transmission), securing to engine and transmission holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Audi S4, 2008 Audi S4, 2007 Audi S4, 2006 Audi S4, and 2005 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Engine (Vehicles With Manual Transmission), Securing To Engine And Transmission Holder

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Shackle 10-222 A/12
Lifting tackle 3033
Engine and Transmission Holder VAS 6095 with Holder for V8 Engine Audi S4, allroad quattro VAS 6095/1-6 or Holder for V8 Engine Audi S4, allroad quattro VAS 6095/1-6A
Shop crane VAS 6100

Lift arm extension for workshop crane VAS 6101

Special tools, testers and auxiliary items required

Fig 2: Identifying Additional Hooks (2) 10-222 A/2

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Additional hooks 10-222 A/2

Work procedure

Fig 3: Removing Wiring Harness Bracket At Right Engine Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove wiring harness bracket at right engine plate - arrows -.

Fig 4: Disconnecting Electrical Harness Connector At Right Engine Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect electrical harness connector - 1 - at right engine mount.
Remove bolts - arrows - and remove right engine mount.

NOTE:

Shown without engine mount plate to provide a better illustration.

Repeat work procedure on opposite side of vehicle.

Fig 5: Disconnecting Vacuum Hose & Air Guide Hose From Throttle Valve Control Module

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect vacuum hose - 1 -.
Disconnect air guide hose - 2 - from throttle valve control module.

Fig 6: Securing Shackle 10-222 A/12 To Right Rear Engine Lifting Eyelet & Hooking Additional Hook 10-222 A/2 On Shackle 10-222 A/12

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Secure shackle 10-222 A/12 to right rear engine lifting eyelet.
Hook additional hook 10-222 A/2 on shackle 10-222 A/12.

Fig 7: Engaging Engine Sling 3033 On Additional Hook 10-222 A/2 And On Workshop Crane VAS 6100 With Lift Arm Extension For Workshop Crane VAS 6101

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engage engine sling 3033 on additional hook 10-222 A/2 and on workshop crane VAS 6100 with lift arm extension for workshop crane VAS 6101 as shown in the illustration.
Lift engine from support elements of scissor lift platform VAS 6131 A.

Fig 8: Securing Engine With Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Secure engine with Holder for V8 Engine Audi S4, allroad quattro VAS 6095/1-6 or Holder for V8 Engine Audi S4, allroad quattro VAS 6095/1-6A tightened to 42 Nm to Engine and Transmission Holder VAS 6095 as shown in the illustration.