LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Bumpers) >> 63 Bumpers >> Front Bumper >> Bumper Cover End Plate, Removing And Installing >> Bumper Cover End Plate, Removing And Installing, AUDI Q5 S Line And AUDI Sq5 >> Rear Bumper Cover End Plate, Removing And Installing

Rear Bumper Cover End Plate, Removing And Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Removing 

Fig 1: Removing/Installing Rear Bumper Cover End Plate
GWWA63-10869Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -A arrows-.

-- Pull the rear end plate -2- down slightly -Pfeil B- and remove it from the front end plate -1-.

Installing 

Install in reverse order of removal.

scientia non olet · About LEMON Manuals