ATF In Rear Final Drive 0BF And 0BE, Draining

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2015 Audi S5, 2015 Audi RS 5, and 2014 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools and workshop equipment required

Catch Tray

Overview ATF plugs, refer to Figure and Figure.

Rear Final Drive 0BF

-- Remove the plug so that the ATF can drain faster -arrow-.

Fig 1: Locating ATF Check Plug

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ATF drain plug -arrow- and drain the ATF.

Fig 2: Locating ATF Drain Plug

Courtesy of AUDI OF AMERICA, LLC

-- Install and tighten the new the ATF drain plug -arrow-. Tightening specification, refer to item 15.

Rear Final Drive 0BE

Fig 3: Locating ATF Plugs

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ATF inspection plug so that the ATF can drain faster -1-.

-- Remove the ATF drain plug -2- and drain the ATF.

-- Install and tighten the new ATF drain plug -2-. Tightening specification, refer to item 15.

Continuation for All Rear Final Drives

-- Fill the ATF in the rear final drive. Refer to ATF IN REAR FINAL DRIVE 0BF AND 0BE, FILLING .