LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CTUC & CTUD) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Supercharger Ribbed Belt TENSIONER, Removing And Installing >> Removing

Supercharger Ribbed Belt TENSIONER, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the supercharger ribbed belt, refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolt -1- and ribbed belt tensioner -2- with the Locking Pin T10060A.

Fig 1: Removing/Installing Supercharger Ribbed Belt Tensioner
GWWA13-10654Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals