LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (3.0L - Engine Cooling System - Engine Code(S): CTUC & CTUD) >> 19 Cooling System >> Radiator/Coolant Fan >> Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING >> Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, VEHICLES WITHOUT LEFT RADIATOR FOR CHARGE AIR COOLING CIRCUIT >> Installing

Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, VEHICLES WITHOUT LEFT RADIATOR FOR CHARGE AIR COOLING CIRCUIT: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Install the front wheel housing liner, refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Install the front wheel, wheel bolt tightening specification: 140 Nm. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Fill the coolant, refer to COOLANT, DRAINING AND FILLING .