LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CTUC & CTUD) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head Cover, Removing And Installing >> Left Cylinder Head Cover, Removing And Installing >> Removing

Left Cylinder Head Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ignition Coil Puller T40039 Removing Ignition Coils
GWWA28-0074Courtesy of AUDI OF AMERICA, LLC

-- Remove the ignition coils, refer to IGNITION COILS, REMOVING AND INSTALLING .

CAUTION:

Risk of violating emissions legislation on USA vehicles.

  • Do not open the hose connection -arrow-.

-- Remove the bolts in the following sequence -12 through 1- and lay the left cylinder head aside with the crankcase ventilation hose -arrow- connected.

Fig 2: Left Cylinder Head Cover Bolts
GWWA15-10390Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals