Overview - Balance Shaft And Oil Pump Drive Chain
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Crankshaft
- Drive Chain
- For power take-off
- Mark the running direction with paint for reinstallation
- Removing and installing, refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .
- Drive Chain Sprocket
- For the oil pump
- Installed position: the side with lettering on it faces the engine
- Bolt
- 30 Nm +90°
- Replace
- Pressure Spring
- Bolt
- 15 Nm +90°
- Replace
- Balance Shaft Chain Sprocket
- Installed position: the side with lettering on it faces the transmission
- Chain Tensioner
- With glide track
- Bolt
- 10 Nm +45°
- Replace