Rear Noise Insulation
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Noise Insulation
- Loosen the 3 rear quick-release fasteners on the noise insulation.
- Loosen the quick-release fasteners -6- and remove the noise insulation toward the rear.
- Spring Nut
- Slide into the crossbrace.
- Crossbrace
- Spring Nut
- Slide sideways into the transmission crossmember.
- Washer
- Expanding Clip
- Quantity: 2
- Bolt
- Quantity: 2
- 2.5 Nm
- Bolt
- 2.5 Nm