Seat Belt Height Adjuster, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Press belt height adjuster button and bring height adjuster slide into lowest position.
-- Remove the upper B-pillar trim panel. Refer to B-PILLAR TRIM PANEL, REMOVING AND INSTALLING, UPPER B-PILLAR TRIM PANEL .
-- Move the upper B-pillar trim to the side with the seat belt still threaded through it.
-- Remove the bolt -3-.
-- Remove belt relay -2- with belt webbing -1-.
-- Remove the bolt -5-.
-- Pull seat belt height adjuster -4- up and out of the B-pillar.