Outer Rear Belt Guide, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note The Following:
-- Insert the belt into the depression in the belt guide -1- and then place the belt guide on onto the bracket.
-- Insert the belt guide with the bolt heads in the guides on the console.
-- Press the belt guide down while pulling it forward. This engages the bolt heads in the guides.
-- Pull the belt webbing forward until the retaining hooks engage audibly.