Front Passenger Airbag Unit With Igniter, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
Follow all regulations when disposing of pyrotechnic components. Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, STORING, TRANSPORTING AND DISPOSING .
Follow the allocation of the airbag unit to the instrument panel.

NOTE:

Starting in calendar week 45/2010, the igniter 2 shall be dropped from vehicles for the rest of the world except the USA.

-- Turn on the ignition.

-- Disconnect the battery ground cable with the ignition turned on. Refer to GROUND CABLE WITH BATTERY MONITORING CONTROL MODULE -J367-, REMOVING AND INSTALLING / BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

Fig 1: Front Passenger Airbag Igniter, Removal

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Disconnect the ground -5-.

-- Disconnect the electrical connectors -2- for the Front Passenger Airbag Igniter 2 -N132- and - 6- for the Front Passenger Airbag Igniter 1 -N131-.

-- To do this, release the connector lock -3- using a small screwdriver -1- and remove the electrical connector -2-.

Fig 2: Releasing Connector Lock

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -1, 3, 4 and 7-.

Fig 3: Front Passenger Airbag Igniter, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the passenger airbag -8- downward.

WARNING:

Set the airbag down so the impact cushion faces upward.