Airbag Connector, Replacing, Bolted Airbag Version: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Connect the connector -1- to the airbag igniter -arrow A-.
-- Install the connector locking mechanism -2- -arrow B-. While doing this, the connector is pushed into the airbag igniter and locks into place.
The rest of the installation is performed in reverse order of removal, noting the following:
NOTE:
Make sure the connectors are installed correctly and are secure.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Connect the connector -1- to the airbag igniter -arrow A-.
-- Install the connector locking mechanism -2- -arrow B-. While doing this, the connector is pushed into the airbag igniter and locks into place.
The rest of the installation is performed in reverse order of removal, noting the following:
NOTE:
Make sure the connectors are installed correctly and are secure.