Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the parking brake button to lock the electromechanical parking brake.
-- Shift the selector lever into the "S" position.
-- Turn off the ignition.
-- Carefully pry the selector lever boot out at the side using a Trim Removal Wedge 3409 or a small screwdriver -arrows-.
-- Fold the selector lever boot upward.
-- Release the spring -2- and remove the Selector Lever Transmission Range Position Display Unit -Y26- -1- -arrow-.
Fig 2: Releasing Retaining Spring And Removing Selector Lever Transmission Range (TR) Position Display Y26 Upward
-- Disconnect the connector.