Fuse Panel C -SC- WITH LEFT INSTRUMENT PANEL FUSE PANEL, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- With the ignition switched off, disconnect the ground cable from the battery, refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Pry off the instrument panel side cover -1- using the Trim Removal Wedge 3409 -arrow- and remove it.
-- Release retaining clip -1- in the direction of the -arrow- and press the fuse panels -2 to 4- back and out of Fuse Panel C -SC-.
-- Release the retaining clips -arrow A- and tilt the Fuse Panel C -SC- -2- in the direction of -arrow B- on the instrument panel central tube -1-.