Fuse Panel D -SD- WITH RIGHT INSTRUMENT PANEL FUSE CARRIER, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- With the ignition switched off, disconnect the ground cable from the battery, refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the glove compartment, refer to Storage Compartments and Covers .
-- Remove the Instrument Panel 46-Pin Connector -T46s- mount -4-, refer to Instrument Panel CAN Cut-Off Connector -T46s- MOUNT, REMOVING AND INSTALLING .
-- Release retaining clips -1- in the direction of the -arrow- and press the fuse panels -2- and -3- back and out of Fuse Panel D -SD-.
-- Release the retaining clips -arrow A- and tilt the Fuse Panel D -SD- -2- in the direction of -arrow B- on the instrument panel central tube -1-.