Cylinder Head Cover - Tightening Specifications and Sequence

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2015 Audi A4, and 2014 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cylinder Head Cover Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

Tighten the bolts in the steps shown in the sequence:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 6-	Install all the way in multiple steps by hand
2.	-1 to 6-	8 Nm
3.	-1 to 6-	90° additional turn

NOTE: Make sure that the cylinder head cover is not tilted.