Vacuum Pump, TFSI V6: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Audi S4, 2013 Audi A4, 2012 Audi S4, 2012 Audi A4, and 2011 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosens the hose clamp on the vacuum hose.
CAUTION:
Do not damage the vacuum hose. Replace the vacuum hose if damaged.
-- Remove the vacuum hose form the vacuum pump.
-- Remove all the screws on the vacuum pump sealing flange.
-- Remove the vacuum pump from the mount.