LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Gears & Hydraulic Controls - MULTITRONIC Transmission 0AW (Sedan) (As Of 09.2014)) >> 38 Gears, Hydraulic Controls >> Clutch >> Overview - Reverse Gear Clutch

Overview - Reverse Gear Clutch

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi A4, 2015 Audi A4, 2014 Audi A4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Reverse Gear Clutch Overview
GWWA38-10097Courtesy of AUDI OF AMERICA, LLC
  1. Corrugated Spring Washer
    • Replacing
  2. Lower Adjustment Disc
    • Determine thickness "E1 " (See Figure).
    • The thickness of the setting discs under "E1 " must be at least 2.15 mm
    • Replacing
  3. Lining Disc
    • Quantity: 6
    • Replacing
  4. Upper Adjustment Disc
    • Determining the thickness "E2 " (See Figure).
    • Replacing
  5. Externally Toothed Plate
    • Quantity: 5
    • Replacing