LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (2.0L - Exhaust System & Emission Controls - Engine Code(S): CAEB, CAED, CPMA & CPMB (Sedan)) >> 26 Exhaust System >> Exhaust Pipes/Mufflers >> Overview - Muffler >> Overview - Muffler, Vehicles With Two Rear Mufflers >> Installed Position of Rear Clamping Sleeve

Installed Position of Rear Clamping Sleeve

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installed Position Of Rear Double Clamps
GWWA26-10036Courtesy of AUDI OF AMERICA, LLC

-- Install double clamps so that the bolt ends do not project over lower edge of double clamp.

scientia non olet · About LEMON Manuals