LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (3.2L - Cylinder Head & VALVETRAIN - Engine Code: CALA (Sedan)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Right Cylinder Head Cover, Removing And Installing >> Installing

Right Cylinder Head Cover, Removing And Installing: Installing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the cylinder head seal if it is damaged.

Replace the cylinder head cover bolts when replacing the damaged seal.

-- Clean the sealing surfaces. They must be free of oil and grease.

-- Tighten the right cylinder head cover bolts. Refer to Figure.

scientia non olet · About LEMON Manuals