Removing Cylinder "4":

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

The engine is removed and secured to the engine/transmission holder. Refer to ENGINE, SECURING ON ENGINE AND TRANSMISSION HOLDER .

Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .
Remove the balance shaft timing chain. Refer to Camshaft Timing Chain, Removing and Installing .
Remove the connecting rod bearing cap.
Remove the crankshaft bearing cap.
Remove the crankshaft.